top of page

Submersible Pumps

POMEK umboðar góðsku dykkpumpur frá HCP í Føroyum

Um HCP

100HD215

Used as general dewatering pumps in mines, quarries and construction sites.
These radically engineered, robust pumps offer unmatched wear resistance and performance.
The pump of choice if you demand reliability

Features

  • Compact, robust and easy handling for all construction and civil engineering dewatering application conditions.

  • Stainless steel (SUS304) outer casing, the self-cooling motor is suitable for continuous duty and low water level conditions.

  • Standard accessories include the cable with an epoxy resin sealed water-resistant cable base, Auto-cut motor protector, double mechanical seals, oil seal design, and High Solid Epoxy coating.

  • High efficient special impeller design in High Chrome Alloy steel (HiCrFC), with a hardness of 55 - 60 Rockwell, to stand high abrasive applications.

  • The pump internal castings are all protected by the high solids epoxy coating, which can prolong the metal life and avoid corrosion and oxidation.

  • The mechanical seal bracket is covered by EPDM with anti-abrasive wear for HD 15~20HP models.

  • Optional ADTC (Adapter Connection) Casing to connect suction with inline pipe, allowing surface/ inline/deep well pumping.

Applications

  • Civil engineering, dewatering, tunneling, groundworks, mining and manhole sewer.

  • Industrial wastewater dewatering of fluids containing solid sediments.

  • Portable use for contractors, installers and industry.

​

Leinkja til datablað

100HD211

Used as general dewatering pumps in mines, quarries and construction sites.
These radically engineered, robust pumps offer unmatched wear resistance and performance.
The pump of choice if you demand reliability

Features

  • Compact, robust and easy handling for all construction and civil engineering dewatering application conditions.

  • Stainless steel (SUS304) outer casing, the self-cooling motor is suitable for continuous duty and low water level conditions.

  • Standard accessories include the cable with an epoxy resin sealed water-resistant cable base, Auto-cut motor protector, double mechanical seals, oil seal design, and High Solid Epoxy coating.

  • High efficient special impeller design in High Chrome Alloy steel (HiCrFC), with a hardness of 55 - 60 Rockwell, to stand high abrasive applications.

  • The pump internal castings are all protected by the high solids epoxy coating, which can prolong the metal life and avoid corrosion and oxidation.

  • The mechanical seal bracket is covered by EPDM with anti-abrasive wear for HD 15~20HP models.

  • Optional ADTC (Adapter Connection) Casing to connect suction with inline pipe, allowing surface/ inline/deep well pumping.

Applications

  • Civil engineering, dewatering, tunneling, groundworks, mining and manhole sewer.

  • Industrial wastewater dewatering of fluids containing solid sediments.

  • Portable use for contractors, installers and industry.

​

Leinkja til datablað

IC-610

HCP IC-610 is submersible dewatering pump for agriculture water supply.

  • 3 phase

Features

  • The internal casting is treated with high solid painting, which can double the duration of anti-rusting, and extend the lifetime of the product.

  • Standard design, incorporating a dry motor with thermal auto-cut that prevents the motor from over heating, and a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant double mechanical seal and an additional oil seal.

  • Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings.

  • An exceptional High-lift and suction impeller design, which allow for dewatering of underground or circulating water applications.

  • For above or below surface water applications; the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W–Well Type)

  • New casing cover, with metric thread bolt hole that is easier for valve and adapter connection.

  • High solids Epoxy coating prolong metals from corrosion and oxidisation.

Applications

  • Agriculture water supply and drainage.

  • Water supply for agricultural irrigation systems and underground water pumping.

  • Landscape, water feature and horticulture irrigation.

  • Extraction of water from rivers, lakes and reservoirs.

Limits of use

  • Liquid temperature: 0~40°C (32~104)

  • Submersion Depth: 30m (100 ft)

Specifications

  • Power10 HP (7500 watts)

  • Discharge6″ (150mm)

  • Phase3Ø

  • Start MethodDirect

  • Efficient / Maximum Head17 / 29 meters

  • Efficient / Maximum Flow Rate1500 / 2600 L/min

  • Solid Passage10mm (3/8″)

  • Weight: 81 kg

80(100)SFP211

Features

  • Precision casting with the use of an advanced stainless investment casting method, produces the highest quality with a smooth surface finish.

  • Standard accessories include : cable with an epoxy resin sealed water-resistant cable base, Auto-cut motor protector, dual mechanical seals and lip seal design.

  • Chemically protected Viton O-rings to handle acidic and corrosive fluids.

  • Pump hydraulic body made of corrosion resistant SUS316/SCS14 stainless steel material, to handle low pH value chemical media and/or seawater applications.

  • Austenitic Stainless Steel(SUS300 series)is used in SF/SA series. SUS316/SCS14 is better  than SUS304/SCS13 in water application of light acid-base.

  • pH2~10 (As reference at operating temperature range 0 - 40°C)
     

Applications

  • Wastewater treatment in food and wine-making industry.

  • Wastewater treatment of acid fluid in gold mining, petroleum industry and dyeing industry.

  • Chemicals, low pH, corrosive and sea water applications.

80SFU23.7

HCP 80SFU23.7 is a submersible stainless steel SS316 pump for sea water, light acid & corrosive water.

  • SS316

  • 3 phase

  • Without auto float switch

  • Former model: SF35U

Features

  • Best structure design, has a dry motor, IP68, double mechanical seals, equipped with an auto-cut protection, pump casting, outer cover is stainless steel, and acid-resistant silicon carbide seals.

  • The stainless series is suitable for all light acid, corrosive and/or sea water application fluid in pH values between 4 to 10pH. For strong acidity and alkalinity applications, please use the specified chemical pump.

  • Investment Casting Precision casting with the use of an advanced stainless investment casting method that produces the highest quality with a smooth surface finish.

  • Viton O-ring Viton O-rings are used throughout the pump to give better pump life in corrosive acid and aggressive media.

  • Austenitic Stainless Steel – SS316 – water application of light acid-base.

Specifications

  • Power5HP (3700 watts)

  • Discharge3″ (80mm)

  • Phase3Ø

  • Start MethodDirect

  • Efficient / Maximum Head17.5 / 26 meters

  • Efficient / Maximum Flow Rate500 / 1050 L/min

  • Solid Passage50mm

  • Weight 40 kg

80HD22,2

HCP 80HD22.2 is submersible dewatering pump for civil engineering, dewatering, tunnel, ground works, mining & manhole sewer.

  • Carry with Outlet Flange

  • 1 phase

  • Former Model: 80ASN22.2

Features

  • Designed for civil engineering applications; its easy portability, double outer casing and water cooling motor make it possible to run the pump to low water level.

  • The pumps are durable and leakproof structure with automatic resetting motor protection and double mechanical seals made of silicon carbide.

  • The internal casting is coated with High Solid Epoxy coating to prolongs metals from corrosion and oxidisation.

  • Multi-impeller design with High Chrome Alloy Steel (HiCrFC) impeller, wear plate and wear rings with a hardness if 55-60 Rockwell. It is the hardest and toughest impeller among the construction pump and against abrasion.

  • The pumps are durable with Epoxy Resin Cable, IP68 waterproof structure, automatic resetting and double mechanical seal made of silicon carbide.

Applications

  • Civil engineering, dewatering, tunnel, ground works, mining and manhole sewer.

  • Industrial wastewater dewatering or recycling fluids containing solid sediments for Gravel pit, Sand and Gravel plant.

  • Mobile use for contractors, installers and industries.

Specifications

  • Power3 HP (2200 watts)

  • Discharge3″ (80mm)

  • Phase1Ø

  • Start MethodCapacitor

  • Efficient / Maximum Head14 / 20 meters

  • Efficient / Maximum Flow Rate500 / 850 L/min

  • Solid Passage10mm

  • Weight45 kg

IC-32B

HCP IC32B is submersible dewatering pump for agriculture water supply.

  • 3 phase

Features

  • The internal casting is treated with high solid painting, which can double the duration of anti-rusting, and extend the lifetime of the product.

  • Standard design, incorporating a dry motor with thermal auto-cut that prevents the motor from over heating, and a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant double mechanical seal and an additional oil seal.

  • Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings.

  • An exceptional High-lift and suction impeller design, which allow for dewatering of underground or circulating water applications.

  • For above or below surface water applications; the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W–Well Type)

  • New casing cover, with metric thread bolt hole that is easier for valve and adapter connection.

  • High solids Epoxy coating prolong metals from corrosion and oxidisation.

Applications

  • Agriculture water supply and drainage.

  • Water supply for agricultural irrigation systems and underground water pumping.

  • Landscape, water feature and horticulture irrigation.

  • Extraction of water from rivers, lakes and reservoirs.

Limits of use

  • Liquid temperature: 0~40°C (32~104)

  • Submersion Depth: 30m (100 ft)

Specifications

  • Power2 HP (1500 watts)

  • Discharge3″ (80mm)

  • Phase3Ø

  • Start MethodDirect

  • Efficient / Maximum Head9.5 / 14 meters

  • Efficient / Maximum Flow Rate500 / 800 L/min

  • Solid Passage10mm (3/8″)

  • Weight: 36 kg

GDR-750

  • The GD models are designed for the construction industry because they are lightweight, portable, and durable. The motor frame and mechanical seal bracket are made of aluminum alloy - that provides extra water cooling, to the motor, when water flows through. Features an all new design with exchangeable discharges, that are available in vertical and horizontal orientation. They also provide extra adaptability and flexibility to various conditions of installations, such as: confined spaces, 8 inch narrow wells or shallow water.

  • The model is equipped with: mechanical seals (silicon carbide), epoxy resin cable, watertight body structure that meets IP68 requirements, an auto-cut motor protector, and a water-cooling motor.

  • The impeller and the hydraulic components are made of a special rubber that is durable and capable of handling construction site dewatering.

  • The models are available in the manual version and the automatic version - equipped with a built in floating switch to automatically switch the pump on and off.

  • The impeller is made with an urethane rubber that provides extra wear-resistance on construction site dewatering.

Applications

  • Civil engineering, dewatering of tunneling and ground works, and for use in storm water sewers.

  • Dewatering of fluids containing solids.

  • Ease of mobility for use by contractors, installers and service industries.

GDR-400

HCP GDR400 is a water cooling pump with rubber suction pads for residual removal as low as 1mm water level.

  • 1 phase

  • Without auto float switch

Features

  • A water cooling motor with rubber suction pads for residual removal as low as 1 mm (0.39″). Start up at water level of 5 mm.

  • The best pump for removing water from flat surfaces because of its portability and light weight.

  • IP68, an auto-cut motor protector and rubberised hydraulic components that can withstand any tough applications.

Applications

  • Basement / Pool / Pond water removal.

  • Residential, Commercial residue dewatering.

Specifications

  • Power0.5 HP (400 watts)

  • Discharge1″ (25mm)

  • Phase1Ø

  • Start MethodCapacitor

  • Efficient / Maximum Head8 / 10 meters

  • Efficient / Maximum Flow Rate70 / 200 L/min

  • Solid Passage–

  • Weight: 10.5 kg

Flot

Flot

Flot
Góðsku flot við 3m kaðal.

IP68.

​

bottom of page