top of page

Dykkpumpur

POMEK umboðar góðsku dykkpumpur frá HCP í Føroyum

Um HCP

100HD215

Used as general dewatering pumps in mines, quarries and construction sites.
These radically engineered, robust pumps offer unmatched wear resistance and performance.
The pump of choice if you demand reliability

Features

  • Compact, robust and easy handling for all construction and civil engineering dewatering application conditions.

  • Stainless steel (SUS304) outer casing, the self-cooling motor is suitable for continuous duty and low water level conditions.

  • Standard accessories include the cable with an epoxy resin sealed water-resistant cable base, Auto-cut motor protector, double mechanical seals, oil seal design, and High Solid Epoxy coating.

  • High efficient special impeller design in High Chrome Alloy steel (HiCrFC), with a hardness of 55 - 60 Rockwell, to stand high abrasive applications.

  • The pump internal castings are all protected by the high solids epoxy coating, which can prolong the metal life and avoid corrosion and oxidation.

  • The mechanical seal bracket is covered by EPDM with anti-abrasive wear for HD 15~20HP models.

  • Optional ADTC (Adapter Connection) Casing to connect suction with inline pipe, allowing surface/ inline/deep well pumping.

Applications

  • Civil engineering, dewatering, tunneling, groundworks, mining and manhole sewer.

  • Industrial wastewater dewatering of fluids containing solid sediments.

  • Portable use for contractors, installers and industry.

​

Leinkja til datablað

100HD211

Used as general dewatering pumps in mines, quarries and construction sites.
These radically engineered, robust pumps offer unmatched wear resistance and performance.
The pump of choice if you demand reliability

Features

  • Compact, robust and easy handling for all construction and civil engineering dewatering application conditions.

  • Stainless steel (SUS304) outer casing, the self-cooling motor is suitable for continuous duty and low water level conditions.

  • Standard accessories include the cable with an epoxy resin sealed water-resistant cable base, Auto-cut motor protector, double mechanical seals, oil seal design, and High Solid Epoxy coating.

  • High efficient special impeller design in High Chrome Alloy steel (HiCrFC), with a hardness of 55 - 60 Rockwell, to stand high abrasive applications.

  • The pump internal castings are all protected by the high solids epoxy coating, which can prolong the metal life and avoid corrosion and oxidation.

  • The mechanical seal bracket is covered by EPDM with anti-abrasive wear for HD 15~20HP models.

  • Optional ADTC (Adapter Connection) Casing to connect suction with inline pipe, allowing surface/ inline/deep well pumping.

Applications

  • Civil engineering, dewatering, tunneling, groundworks, mining and manhole sewer.

  • Industrial wastewater dewatering of fluids containing solid sediments.

  • Portable use for contractors, installers and industry.

​

Leinkja til datablað

IC-610

HCP IC-610 is submersible dewatering pump for agriculture water supply.

  • 3 phase

Features

  • The internal casting is treated with high solid painting, which can double the duration of anti-rusting, and extend the lifetime of the product.

  • Standard design, incorporating a dry motor with thermal auto-cut that prevents the motor from over heating, and a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant double mechanical seal and an additional oil seal.

  • Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings.

  • An exceptional High-lift and suction impeller design, which allow for dewatering of underground or circulating water applications.

  • For above or below surface water applications; the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W–Well Type)

  • New casing cover, with metric thread bolt hole that is easier for valve and adapter connection.

  • High solids Epoxy coating prolong metals from corrosion and oxidisation.

Applications

  • Agriculture water supply and drainage.

  • Water supply for agricultural irrigation systems and underground water pumping.

  • Landscape, water feature and horticulture irrigation.

  • Extraction of water from rivers, lakes and reservoirs.

Limits of use

  • Liquid temperature: 0~40°C (32~104)

  • Submersion Depth: 30m (100 ft)

Specifications

  • Power10 HP (7500 watts)

  • Discharge6″ (150mm)

  • Phase3Ø

  • Start MethodDirect

  • Efficient / Maximum Head17 / 29 meters

  • Efficient / Maximum Flow Rate1500 / 2600 L/min

  • Solid Passage10mm (3/8″)

  • Weight: 81 kg

80(100)SFP211

Features

  • Precision casting with the use of an advanced stainless investment casting method, produces the highest quality with a smooth surface finish.

  • Standard accessories include : cable with an epoxy resin sealed water-resistant cable base, Auto-cut motor protector, dual mechanical seals and lip seal design.

  • Chemically protected Viton O-rings to handle acidic and corrosive fluids.

  • Pump hydraulic body made of corrosion resistant SUS316/SCS14 stainless steel material, to handle low pH value chemical media and/or seawater applications.

  • Austenitic Stainless Steel(SUS300 series)is used in SF/SA series. SUS316/SCS14 is better  than SUS304/SCS13 in water application of light acid-base.

  • pH2~10 (As reference at operating temperature range 0 - 40°C)
     

Applications

  • Wastewater treatment in food and wine-making industry.

  • Wastewater treatment of acid fluid in gold mining, petroleum industry and dyeing industry.

  • Chemicals, low pH, corrosive and sea water applications.